96270A RF Reference Source Firmware Upgrade

Serial Number Range	Backward Compatibility	Date	Firmware Revision	Explanations
All	All previous versions 96270A	April 2, 2019	V1.13	Extend capability of previous 96270A models to accept Rohde & Schwarz NRPxxT power sensors. Full list of all sensors recognised by 96270 with install firmware V1.13 installed: Older NRP-Z51, NRP-Z52, NRP-Z55, NRP-Z56, NRP-Z57and NRP-Z58 Now extended to include: New: NRP18T, NRP18TN, NRP33T, NRP33TN, NRP40T, NRP40TN, NRP50T, NRP50TN, NRP67T, NRP67TN and NRP110T. Resolves minor resolved issues

Serial Number Range

Backward Compatibility

Date

Firmware Revision

Explanations

All

All previous versions 96270A

April 2, 2019

V1.13

Extend capability of previous 96270A models to accept Rohde & Schwarz NRPxxT power sensors.

Full list of all sensors recognised by 96270 with install firmware V1.13 installed:

Older NRP-Z51, NRP-Z52, NRP-Z55, NRP-Z56, NRP-Z57and NRP-Z58

Now extended to include:

New: NRP18T, NRP18TN, NRP33T, NRP33TN, NRP40T, NRP40TN, NRP50T, NRP50TN, NRP67T, NRP67TN and NRP110T.

Resolves minor resolved issues

Firmware Installation Instructions

Power off the Product.
On the back panel locate the dip switches and set dip switch 6 to its up position.
Insert the USB stick.
Turn on the Product. A yellow screen with an empty progress bar should appear on the screen.
Follow the on screen instructions.
When complete, place the dip switch (6) down again to its original position, remove the USB stick and power cycle.
Firmware update complete.

||||